PRODUCT

CROSBY SWIVEL HOOKS S-322CN / S-322AN

CROSBY SWIVEL HOOKS S-322CN / S-322AN

CROSBY SWIVEL HOOKS S-322CN / S-322AN

Forged - Quenched and Tempered.
Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk.
Every Crosby Swivel hoist hook has a pre-drilled cam which can be equipped with a latch. Simply purchase the latch assemblies listed and shown on pages 97-99. Even years after purchase of the original hook, latch assemblies can be added.
Low profile hook tip designed to utilize Crosby S-4320 or PL-N latch kit. Simply purchase the latch assemblies listed and shown on pages 97-98. Even years after purchase of the priginal hook, latch assemblies can be added.

  • Forged - Quenched and Tempered.
  •  

  • Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk.
  •  

  • Every Crosby Swivel hoist hook has a pre-drilled cam which can be equipped with a latch. Simply purchase the latch assemblies listed and shown on pages 97-99. Even years after purchase of the original hook, latch assemblies can be added.
  •  

  • Low profile hook tip designed to utilize Crosby S-4320 or PL-N latch kit. Simply purchase the latch assemblies listed and shown on pages 97-98. Even years after purchase of the priginal hook, latch assemblies can be added.
  •  

  • Load rating codes stamped on each hook. 322 Swivel Hooks use the same load rating code as 319 Shank Hooks, see page 88 for proper Hook Identification Codes.
  •  

  • Hoist hooks incorporate markings forged into the product which address two (2) QUIC-CHECK® features:
  •  

  • Deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK® measurement to determine if the throat opening has changed, thus indicating abuse or overload.
  •  

  • Angle Indicators — Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.
  •  

     

     

    This hook is a positioning device and is not intended to rotate under load. For swivel hooks designed to rotate under load, see pages 93, 95,

    103, 106, 111-115. Use in corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.2.1(b)(2)(c) 2000.
     

  • U.S. Patents 5,381,650 & 5,193,480 & 5,103,755 and foreign equivalents.
  •  

    Carbon swivel hooks .75tC-15tC: proof load is 2 times working load limit. 

    Designed with a 5 to 1 safety factor.
    Alloy swivel hooks 1.25tA-31.5tA : proof load is 2.5 times working load limit. 
    Designed with a 4 to 1 safety factor.
    † Dimensions for hooks 3/4 ton carbon thru 22 ton alloy are for S-4320 latch kits. 
    Dimensions for hooks 31.5 ton alloy are for PL latch kit.
     

     

    Working Load
    Limit
    DOR(t)*

    NrM Carbon S-332CN Stock No.

    NrM.
    Carbon S-332AN Stock No.

    Weight Each
    (kg)

    Dimensions (mm)

    carbon

    Alloy

    A

    B

    C

    D

    F

    G

    H

    J

    K

    L

    M

    O

    R

    S

    AA

    0.75

    1.25

    1048600

    1048804

    0.34

    51.0

    20,8

    31,8

    72,5

    31,8

    18,5

    20,6

    23,6

    16,0

    144

    16,0

    23,6

    116

    9,65

    38,1

    1

    1.60

    1048609

    1048813

    0.57

    63.5

    33,3

    38,1

    80,0

    35,1

    21,3

    23,9

    24,6

    18,0

    170

    18,0

    24,6

    136

    12,7

    50,8

    1.6

    2.50

    1048618

    1048822

    1.02

    73.0

    38,1

    44,5

    91,0

    38,1

    25,4

    29,5

    26,9

    22,4

    197

    22,4

    26,9

    155

    16,0

    50,8

    2

    3,20

    1048627

    1048831

    1.04

    73.0

    38,1

    44,5

    102

    41,1

    28,7

    33,3

    30,2

    23,9

    210

    23,9

    29,5

    165

    16,0

    50,8

    3,2

    5,4

    1048636

    1048837

    2.25

    89.0

    41,7

    50,8

    123

    51,0

    36,6

    41,4

    38,1

    33,3

    246

    28,7

    35,8

    191

    19,1

    63,5

    5

    8.0

    1048645

    1048854

    4.67

    116

    58,0

    63,5

    160

    63,5

    46,0

    52,5

    45,2

    42,2

    317

    36,6

    42,9

    245

    25,4

    76,2

    7.5

    11.5

    1048654

    1048865

    7.34

    127

    64,5

    70,0

    192

    76,0

    57,0

    67,0

    51,0

    47,8

    375

    41,4

    56,5

    289

    28,7

    101

    10

    16

    1048666

    1048877

    10.5

    143

    63,0

    79,0

    212

    82,5

    66,0

    74,5

    66,5

    55,5

    417

    49,3

    61,0

    311

    31,8

    101

    15

    22

    1048672

    1048886

    21.3

    180

    95,5

    104

    263

    108

    76,0

    89,0

    86,5

    68,5

    542

    60,5

    81,0

    424

    38,1

    127

    -

    31.5

    -

    1048688

    32.0

    180

    95,5

    104

    346

    127

    93,0

    118

    102

    72,5

    590

    76,2

    82,6

    459

    38,1

    165

     

    * NOTE: Carbon swivel hooks ,75tC-15tC: proofloads is 2 times working load limit. Designed with a 5 to 1 safety factor. Alloy swivel hooks 1,5tA-22tA: proofload is 2,5 times working load limit. Designed with a 4 to 1 safety factor.
    Alloy swivel hooks 31.5LA: proofload is 2 times working load limit. Designed with a 4 to 1 safety factor.