PRODUCT

Crosby G-2150 Bolt Type Chain Shackles

Crosby G-2150 Bolt Type Chain Shackles

Crosby G-2150 Bolt Type Chain Shackles

Crosby G-2150 Bolt Type Chain Lifting Shackles, "D" Shackles (Dee Shackles) with Nut & Split Pin - Range from 330kg to 85,000kg

Crosby G-2150 Bolt Type Chain Lifting Shackles, "D" Shackles (Dee Shackles) with Nut & Split Pin - Range from 330kg to 85,000kg 

Crosby Bolt Type Chain Shackles.

Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B20.26.

Bolt Type Chain shackles with thin head bolt - nut with cotter pin. Meets the performance requirements of Federal Specifications RR-C-271D Type IVB, Grade A Class 3, except for those provisions required of the contractor.

Features

  • Working Load Limit permanently shown on every shackle. Capacities 1/3 thru 150 metric tons.
  • Forged quenched and tempered, with alloy pins.
  • Hot Dip galvanized or self-colored.
  • Fatigue rated.
  • Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification.
  • Shackles 85 metric tons and larger can be provided as follows.
    • Non Destructive Tested
    • Serialized pin and bow
    • Material Certification. Chemical certification must be requested at time of order.
  • Look for the Red Pin . . . the mark of genuine Crosby quality.

Metric Dimension and Specifications

Note: For imperial dimensions and specifications please see the 'Imperial Specifications' tab above.

Nominal
Size
(in.)
Working
Load
Limit
(t)*
Stock No. Weight
Each
(kg)
Dimensions (mm) Tolerance
+/-
G-2150 S-2150 A B D F G K M P R G A Dimensional Diagram
1/4 1/2 1019768 - .06 11.9 7.85 6.35 15.5 19.1 40.4 24.6 39.6 6.35 1.50 1.50 G-2150 and 2150 drawing
5/16 3/4 1019770 - .10 13.5 9.65 7.85 19.1 25.4 48.5 29.5 46.2 7.85 1.50 1.50
3/8 1 1019772 - .15 16.8 11.2 9.65 23.1 31.0 58.5 35.8 55.0 9.65 3.30 1.50
7/16 1-1/2 1019774 - .22 19.1 12.7 11.2 26.9 36.1 67.5 41.1 63.5 11.2 3.30 1.50
1/2 2 1019775 1019784 .34 20.6 16.0 12.7 30.2 41.4 77.0 46.0 71.0 12.7 3.30 1.50
5/8 3-1/4 1019793 1019800 .67 26.9 19.1 16.0 38.1 51.0 95.5 58.5 89.5 16.0 3.30 1.50
3/4 4-3/4 1019819 1019828 1.14 31.8 22.4 19.1 46.0 60.5 115 70.0 103 20.6 6.35 1.50
7/8 6-1/2 1019837 1019846 1.74 36.6 25.4 22.4 53.0 71.5 135 81.0 120 24.6 6.35 1.50
1 8-1/2 1019855 1019864 2.52 42.9 28.7 25.4 60.5 81.0 151 93.5 135 25.4 6.35 1.50
1-1/8 9-1/2 1019873 1019882 3.45 46.0 31.8 28.7 68.5 91.0 172 103 150 31.8 6.35 1.50
1-1/4 12 1019891 1019908 4.90 51.5 35.1 31.8 76.0 100 191 115 165 35.1 6.35 1.50
1-3/8 13-1/2 1019917 1019926 6.24 57.0 38.1 35.1 84.0 111 210 127 183 38.1 6.35 3.30
1-1/2 17 1019935 1019944 8.39 60.5 41.4 38.1 92.0 122 230 137 196 41.1 6.35 3.30
1-3/4 25 1019953 1019962 14.2 73.0 51.0 44.5 106 146 279 162 230 54.0 6.35 3.30
2 35 1019971 1019980 21.2 82.5 57.0 51.0 122 172 312 184 264 60.0 6.35 3.30
2-1/2 55 1019999 1020004 38.6 105 70.0 66.5 145 203 377 238 344 66.5 6.35 6.35
3 85 1020013 - 56 127 82.5 76.0 165 216 429 279 419 89.0 6.35 6.35