PRODUCT

Crosby G-2160 / S-2160 Wide Body Bolt Shacle

Crosby G-2160 / S-2160 Wide Body Bolt Shacle

Crosby G-2160 / S-2160 Wide Body Bolt Shacle

Crosby G-2160 / S-2160 Wide Body Bolt Type Lifting Bow Shackles with Nut - Range from 7000kg to 1,550,000kg

Crosby G-2160 / S-2160 Wide Body Bolt Type Lifting Bow Shackles with Nut - Range from 7000kg to 1,550,000kg 

Crosby Wide Body Shackles with bolt type fixing.

Wide Body Shackle

Features

All sizes of this shackle are Quenched and Tempered for maximum strength. Made from forged alloy steel from 7 through 300 metric tons and cast alloy steel from 400 through 1550 metric tons. All ratings are in metric tons, embossed on side of bow.

Crosby wide body anchor shackles technical diagram

  • Sizes 300 tons and smaller are proof tested to 2 times the Working Load Limit.
  • Sizes 400 tons and larger are tested to 1.33 times the Working Load Limit.
  • G-2160 bows are furnished Dimetcoted and pins are Dimetcoted, then painted red.
  • S-2160 bows and pins are painted red.
  • 30-1550t are RFID equipped.
  • Greatly improves wear-ability of wire rope slings.

More Information

  • Can be used to connect HIGH STRENGTH Synthetic Web Slings, HIGH STRENGTH Synthetic Round Slings or Wire Rope Slings.
  • Increase in shackle bow radius provides minimum 58% gain in sling bearing surface and eliminates need for a thimble.
  • Increases usable sling strength minimum of 15%.
  • Pin is non-rotating, with weld -on handles for easier use (300t and larger).
  • All 2160 shackles are individually proof tested and magnetic particle inspected. Crosby certification available at time of order.
  • Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
  • Shackles requiring ABS, Lloyds and other certifications are available upon special request and must be specified at time of order.
  • Shackles 30t and larger meet DNV approval and are produced in accordance with certified lifting appliance requirements.

Metric Dimensions

see imperial tab above for imperial specifications

Working Load Limit (t)*  G-2160 Stock No. S-2160 Stock No.  Weight Each (kg)  Dimensions (mm)  
B +/-6.35  D +/-.5 
7 1021256 1021548 1.81 105 31.8 17.5 22.4 46.2 31.8 90.4 40.6 31.8 104 149
12.5 1021265 1021557 4.54 137 42.9 23.4 28.7 60.5 34.8 118 54.1 41.4 140 194
18 1021274 1021566 6.8 170 51.6 29.5 35.1 68.3 38.1 148 63.5 50.8 172 238
30 1021283 1021575 11.34 195 60.2 35.1 41.4 88.9 44.5 176 79.5 63.5 216 289
40 1021285 1021584 15.88 236 73.2 42.9 50.8 102 58.7 205 95.3 76.2 270 346
55 1021287 1021593 32.21 263 82.6 50.8 57.2 118 66.8 238 114 88.9 311 397
† 75  1021290 - 45 365 105 53.8 69.9 127 63.5 293 121 92.5 312 468
† 125  1021307 - 73 419 130 65 80 145 80 365 150 110 380 575
† 200  1021316 - 227 525 150 85.1 105 185 110 480 205 137 495 757
† 300  1021325 - 379 615 187 102 133 235 137 600 264 160 594 946
400 1021334 - 500 769 220 131 160 300 160 575 320 185 690 985
500 1021343 - 650 847 250 146 180 340 170 630 340 225 790 1085
600 1021352 - 860 915 275 158 200 394 185 700 370 247 865 1200
700 1021361 - 1109 988 300 167 215 376 200 735 400 270 940 1275
800 1021254 - 1368 1058 325 185 230 420 210 750 420 277 975 1323
900 1021389 - 1559 1111 350 198 250 430 220 757 440 293 1025 1373
1000 1021370 - 1824 1168 380 212 270 450 230 760 460 308 1075 1405
1250 1021272 - 2588 1266 430 232 300 533 265 930 530 323 1175 1660
1550 1021281 - 3650 1394 465 269 320 605 404 1075 580 338 1255 1865